Remanufactured injector, cross-ref 84534252. Bench-tested before shipment.
Quote within 24 hours. Send a photo of your nameplate and we will confirm the exact match.
84534252 is supplied as a remanufactured replacement injector. Application recorded for this part: Fits CASE JX70/JX75/JX80/JX90/JX100/JX110, Farmall 110A/110M. The injector sits at the end of the rail and does the final metering work: it receives fuel already at high pressure and decides both how much enters the cylinder and how well atomised it is. That combination governs power, smoke and fuel consumption more directly than almost any other part on the engine. Our rebuild standard: strip to components, clean, measure against wear limits, replace what is worn, machine back to specification where required, then calibrate and bench-test every unit. Units outside specification are not dispatched, test sheets are available on request, and every unit carries a 12-month warranty.
| Part number | 84534252 |
| Condition | Remanufactured (not a genuine OEM new part) |
| Application | Fits CASE JX70/JX75/JX80/JX90/JX100/JX110, Farmall 110A/110M |
| Process | Disassembled, cleaned, measured, wear parts replaced, machined to specification |
| Bench test | Delivery, return flow, opening pressure and leakage recorded before dispatch |
| Warranty | 12 months |
How to tell a failing common rail injector from compression, turbo and air-side faults — and why the cheap checks come first.
Read the guide →Three very different things are sold under similar descriptions. Here is what separates them, and what to ask before you buy.
Read the guide →What the digits on your injector actually mean, why several numbers fit the same part, and how to avoid ordering the wrong one.
Read the guide →
