DIESEL FUEL INJECTION · REMANUFACTURED & AFTERMARKET
Get a Quote
HomeFuel Pump › JE493ZLQ3A
Fuel Injection Pump JE493ZLQ3A
Fuel Injection Pump JE493ZLQ3A view 1
Remanufactured

Fuel Injection Pump JE493ZLQ3A for Isuzu

Remanufactured fuel injection pump, cross-ref JE493ZLQ3A, JX493ZLQ3A, NJ-VE4. Bench-tested before shipment.

Cross-reference / interchange numbers

JE493ZLQ3AJX493ZLQ3ANJ-VE411E1800L019
Condition
Remanufactured — not a genuine OEM new part
Warranty
12 months
Testing
Bench-tested: injection quantity, return flow, opening pressure, leakage
Application
Fits Isuzu — VE4
Request a Quote

Quote within 24 hours. Send a photo of your nameplate and we will confirm the exact match.

About this part

JE493ZLQ3A is supplied as a remanufactured replacement fuel injection pump. Cross-reference numbers: JE493ZLQ3A, JX493ZLQ3A, NJ-VE4, 11E1800L019. Application recorded for this part: Fits Isuzu — VE4. The injection pump is what generates injection pressure and meters fuel to each cylinder in firing order. Because it also provides the timing reference, its condition affects starting, smoke, power and fuel consumption together — a pump that is worn rarely produces a single isolated symptom. Symptoms associated with pump wear include hard starting when hot, loss of power, unstable idle, excess smoke, timing that will not hold, and in some cases diesel getting into the lubricating oil via a leaking drive shaft seal. Before condemning the pump, rule out the cheap causes: supply restrictions, a weak lift pump, air ingress on the suction side and a blocked filter. Check supply pressure and condition at the pump inlet first, then look at delivery and timing. Fitment notes: this unit must be timed to the engine, not simply bolted on. Never force the shaft to align — turn the engine over to meet it. Prime the system before cranking, fit a new drive seal where specified, and verify supply pressure from the lift pump before start-up. Running a dry pump, even briefly, causes damage that no warranty will cover. How we build it: the unit is fully disassembled, cleaned and measured, not simply resealed. Wear items — seals, springs, and where clearance is out of specification the plunger and barrel or nozzle assemblies — are replaced rather than reused. Sealing faces and bores are re-machined back to original clearances, then the unit is calibrated and run on a bench with delivery, return flow, opening pressure and leakage recorded. Anything outside specification does not ship. Test sheets for your specific units are available on request. Covered by a 12-month warranty.

Specifications

Part numberJE493ZLQ3A
ConditionRemanufactured (not a genuine OEM new part)
Cross-referenceJE493ZLQ3A, JX493ZLQ3A, NJ-VE4, 11E1800L019
ApplicationFits Isuzu — VE4
ProcessDisassembled, cleaned, measured, wear parts replaced, machined to specification
Bench testDelivery, return flow, opening pressure and leakage recorded before dispatch
Warranty12 months
Fitment note. Several part numbers in this family look similar. Confirm the number on your existing unit, the engine model and the machine or vehicle application before ordering. Send us a nameplate photo and we will verify the match before dispatch.
All manufacturer names, symbols and part numbers are used for identification and cross-reference purposes only. We are not an authorised distributor and are not affiliated with the original equipment manufacturer. Products offered are remanufactured or new aftermarket replacement parts unless stated otherwise.

More part numbers for Isuzu

Interchangeable and adjacent part numbers

Related technical guides

Related part numbers